4G Fibre Channel SFP BiDi 100 m, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Multimode
- 1550 nm
- 100 m
- 4.25 G
- BiDi
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- STM-16
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Multimode BiDi |
| Compliance Code | BiDi 4G FC LW |
| Operating Temperature | Standard |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1 Gbit/s - 4.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 6 dB |
| Transmit min/max per lane | -9 dBm / -2 dBm |
| Receiver min/max per lane | -15 dBm / 0 dBm (overload) @4G |
| Wavelength TX (Typical) | 1550 nm |
|---|---|
| Wavelength TX (Range) | 1480 - 1580 nm |
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @4G |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-16 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- Accedian Networks # compatible
- ADTRAN # compatible
- ADVA # compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-SX compatible
- Arista SFP-1G-SX compatible
- Aruba Networks # compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Bluecoat # compatible
- Broadcom # compatible
- Brocade / Ruckus # compatible
- Calix # compatible
- Check Point # compatible
- Chelsio # compatible
- Ciena # compatible
- Ciena (ex. Nortel) # compatible
- Cisco (ex. Meraki) # compatible
- Cisco Systems # compatible
- Cisco Systems (ex. Linksys) # compatible
- CommScope (ex. Arris) # compatible
- Cumulus Networks # compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) # compatible
- Edge Core # compatible
- Ericsson # compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera # compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper # compatible
- Juniper (ex BTI Systems) # compatible
- Keymile # compatible
- Keysight (ex. Ixia) # compatible
- Korenix # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- McAfee # compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- NetApp # compatible
- Netgear # compatible
- NetOptics # compatible
- Nokia (ex. Alcatel-Lucent) # compatible
- Nokia Siemens Networks # compatible
- Nvidia (ex. Mellanox) # compatible
- Obsidian # compatible
- Oracle # compatible
- Orckit-Corrigent # compatible
- Packetlight # compatible
- Palo Alto Networks # compatible
- Planet # compatible
- QLogic # compatible
- Quanta # compatible
- Radware # compatible
- Raisecom # compatible
- Ribbon (ex. ECI) # compatible
- SIAE MICROELETTRONICA # compatible
- SonicWALL # compatible
- Sophos # compatible
- Symantec # compatible
- TP-LINK # compatible
- Transition Networks # compatible
- TRENDnet # compatible
- Ubiquiti Networks # compatible
- WatchGuard # compatible
- Waystream (ex. Packetfront) # compatible
- Westermo # compatible
- Zhone # compatible
- Zyxel # compatible
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.