100M SFP BiDi LX Industrial 2 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Multimode
- 1550 nm
- 2 km
- 155 M
- Industrial
- 100M ETH
- STM-1
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Multimode BiDi |
| Compliance Code | BiDi LX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 2 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10 dB |
| Transmit min/max per lane | -20 dBm / -10 dBm |
| Receiver min/max per lane | -30 dBm / -8 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 9 dB |
| Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Moxa SFP-1FEMLC-T compatible
- Nokia (ex. Alcatel-Lucent) iSFP-100-BX-D compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
We are using FLEXOPTIX industrial grade transceivers in our control systems for power electronics and converters. The FLEXBOX is an invaluable tool, making it super easy and quick to configure transceivers. Even larger numbers can be configured easily with the batch configure option, just plug them in one after the other and the rest happens automatically. The power meter, source control and OTDR features are helpful for lab testing or during commissioning. Thanks, FLEXOPTIX for providing universal transceivers of a high quality at decent prices! Your lightning-fast order processing and shipping speed is also impressive.
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
The FLEXBOX is the best thing since sliced bread!