100M SFP BiDi LX SGMII 20 km, ᵀˣ1310 / ᴿˣ1550 nm, LC-Simplex, Singlemode
- 1310 nm
- 20 km
- 125 M
- BiDi
- 100M ETH
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX SGMII |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s |
| Digital Diagnostic Management (DDM) | not implemented |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | Yes |
| Inbuilt FEC | No |
| Powerbudget (dB) | 17 dB |
| Transmit min/max per lane | -15 dBm / -8 dBm |
| Receiver min/max per lane | -32 dBm / -8 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1480 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 9 dB |
| Supported Protocols | Fast Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.
One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.
The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.
In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!