100M SFP LX SGMII 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 125 M
- 100M ETH
Just go to cart and click CREATE QUOTE.
|Connector / Polish||LC-Duplex PC|
|Temperature Range||0°C - 70°C|
|Digital Diagnostic Management (DDM)||Yes, internally calibrated|
|Power Consumption||1.2 W|
|Powerbudget (dB)||15 dB|
|Transmit min/max per lane||-15 dBm / -8 dBm|
|Receiver min/max per lane||-30 dBm / 0 dBm (overload)|
|Wavelength TX (Typical)||1310 nm|
|Wavelength TX (Range)||1260 - 1360 nm|
|Wavelength RX (Typical)||1310 nm|
|Wavelength RX (Range)||1200 - 1600 nm|
|Extinction Ratio||9 dB|
|Supported Protocols||Fast Ethernet|
Transceiver Configuration with FLEXBOXIt's that easy to use
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Extreme 10063 compatible
- Juniper EX-SFP-1FE-LX compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.