100G QSFP28 BiDi CWDM4 with dual CDR 2 km, LC-Simplex APC, Singlemode

Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-CWDM4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s
Up to 2 km via Singlemode OS2
Use ONLY with LC-Simplex APC connectors
Works ONLY with Q.B161HG.2.C as counter-part
Specs
  • int. Mux
  • 2 km
  • 103.12 G
  • LC
Protocols
  • 100G ETH
Part number
Q.B161HG.2.C
In stock
60 pcs

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP28
Connector / Polish LC-Simplex APC
Interface Singlemode BiDi
Compliance Code BiDi CWDM4
Operating Temperature Standard
Modulation NRZ
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s
Bandwidth Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 5 dB
Transmit min/max per lane -6.5 dBm / 2.5 dBm
Receiver min/max per lane -11.5 dBm / 2.5 dBm (overload) @100G
Wavelength TX (Typical) 1271 nm, 1291 nm, 1311 nm, 1331 nm
Wavelength RX (Typical) 1271 nm, 1291 nm, 1311 nm, 1331 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100G
Transmit and Dispersion Penalty 3 dB
Extinction Ratio 3.5 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista 3rd_Party QSFP-100G-CWDM4 compatible
  • Arista QSFP-100G-CWDM4 compatible
  • Brocade 100G-QSFP28-CWDM4-2KM compatible
  • Cisco Systems QSFP-100G-CWDM4-S compatible
  • Extreme 10403 compatible
  • Huawei QSFP-100G-CWDM4 compatible
  • Infinera (ex. Coriant) ZXS-Q8L-4ZZZZ-00 compatible
  • Nokia (ex. Alcatel-Lucent) 3AL82075AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10552AA compatible
  • Nvidia (ex. Mellanox) MMA1B00-C100D compatible
  • Nvidia (ex. Mellanox) MMA1L30-CM compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer / Wyre Borough Council

Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.

Miguel Bérniz Chief Technical Officer / GibFibre Ltd

Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver.

Mike Dallaway Mira 2014 Limited

As an IT company specializing in the installation of network equipment, we've found FLEXBOX by FLEXOPTIX to be an invaluable tool. Its versatility across various transceivers and user-friendly interface has made our job easier and more efficient.

One of the most impressive aspects of FLEXBOX is the reusability of the transceivers. This feature allows us to reconfigure and reuse the transceivers as needed, offering unprecedented flexibility and cost savings.

The performance is robust, and FLEXBOX has not only saved us time but also provided a cost-effective solution without sacrificing quality.

In summary, FLEXBOX by FLEXOPTIX is a must-have tool for anyone in the networking field. We wholeheartedly recommend it and give it a five-star rating.

Gregory Baer CEO / World-Connect Sàrl
More