400G QSFP112 VR4 with dual CDR 50 m, 4x λ850 nm, MTP/MPO-8/12 APC, Multimode

Universal QSFP112 Transceiver
Use FLEXBOX to configure to almost any vendor
For 400GBASE-VR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 425 Gbit/s (4x 106.25 Gbit/s)
Up to 50 m via Multimode OM4
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • 4x 850 nm
  • 50 m
  • 425 G
  • MTP/MPO-8/12
Protocols
  • 100G ETH
  • 400G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
Q.854HG.01.P:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP112
Connector / Polish MTP/MPO-8/12 APC
Interface Multimode
Compliance Code VR4
Distance 50 m
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 425 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 8 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 1.8 dB
Transmit min/max per lane -4.6 dBm / 4 dBm
Receiver min/max per lane -6.4 dBm / 4 dBm (overload) @400G
Wavelength TX (Typical) 4x 850 nm
Wavelength TX (Range) 844 - 863 nm
Wavelength RX (Typical) 4x 850 nm
Laser VCSEL
Receiver Type PIN
Modulation PAM4 @400G
Transmit and Dispersion Penalty 4.4 dB
Extinction Ratio 2.5 dB
Supported Protocols 400G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Nvidia (ex. Mellanox) MMA1Z00-NS400 compatible
Your vendor / compatibility is missing?

What customers say

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net

The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.

Robert Niedermair IT Infrastructure Administrator, INTERCABLE AUTOMOTIVE SOLUTIONS S.r.l.
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
More