800G Flat-Top OSFP VR8 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode

Universal Flat-Top OSFP Transceiver (needs port with riding heat sink)
Use FLEXBOX to configure to almost any vendor
For 800GBASE-VR8 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 850 Gbit/s (8x 106.25 Gbit/s)
Up to 50 m via Multimode OM4
Use ONLY with MTP/MPO-16 APC connectors
Specs
  • pl_lambda 8x 850 nm
  • pl_distance 50 m
  • pl_datarate 850 G
  • pl_connector MTP/MPO-16
Protocols
  • 200G ETH
  • 2x 400G ETH
  • 800G ETH
  • 8x 100G ETH
information-circle
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility chevron-right
Part number
O.858HG.R.005.MP:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
x Cancel OK chevron-right
information-circle You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

    chevron-down
LWL Fibre Cleaner IBC MPO/MTP  
LWL Fibre Cleaner IBC MPO/MTP
0 pcs in stock 96.80 EUR
MTP® female APC to MTP® female APC Multimode OM4 cable 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP® female APC to MTP® female APC Multimode OM4 cable | 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m
As low as 160.76 EUR
pdp_spec

Specification

Form Factor OSFP
OSFP Variant Flat-Top
Connector / Polish MTP/MPO-16 APC
Interface Multimode
Compliance Code VR8
Operating Temperature Standard
Modulation PAM4
Distance 50 m
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 850 Gbit/s
Bandwidth Per Lane 106.25 Gbit/s
Digital Diagnostic Monitoring (DDM) Yes, internally calibrated
Power Consumption 14 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 1.7 dB
Transmit min/max per lane -4.6 dBm / 4 dBm
Receiver min/max per lane -6.3 dBm / 4 dBm (overload) @800G
Wavelength TX (Typical) 8x 850 nm
Wavelength TX (Range) 842 - 868 nm
Wavelength RX (Typical) 8x 850 nm
Laser VCSEL
Receiver Type PIN
Modulation PAM4 @800G
Transmit and Dispersion Penalty 4.4 dB
Extinction Ratio 2.5 dB
Supported Protocols 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 200G Ethernet
FLEXBOX

Transceiver Configuration with FLEXBOX

It's that easy to use
insert
Insert into the FLEXBOX
select
Select and Configure
use
Use with Device
How to get your free FLEXBOX? chevron-right
pdp_comp

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?
pdp_recom

What customers say

You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.

Murat Aybars Founder / Ideatomy

Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!

Fahad Dalwai Network Engineer / Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.

Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.

Miguel Bérniz Chief Technical Officer / GibFibre Ltd

The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!

Klaus Degner Managing Director / Allegro Packets GmbH
More chevron-right