800G Closed-Top OSFP DR8+ with dual CDR 2 km, 8x λ1310 nm, MTP/MPO-16 APC, Singlemode
- 8x 1310 nm
- 2 km
- 850 G
- MTP/MPO-16
- 2x 200G ETH
- 2x 400G ETH
- 2x 400G NDR
- 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | MTP/MPO-16 APC |
| Interface | Singlemode |
| Compliance Code | DR8+ |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 850 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 16.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -3.1 dBm / 4 dBm |
| Receiver min/max per lane | -7.1 dBm / 4 dBm (overload) @800G |
| Wavelength TX (Typical) | 8x 1310 nm |
|---|---|
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1310 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 200G Ethernet, 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 8x 100G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.