800G Closed-Top OSFP DR8 with dual CDR 500 m, 8x λ1310 nm, MTP/MPO-16 APC, Singlemode
- 8x 1310 nm
- 500 m
- 850 G
- MTP/MPO-16
- 2x 400G ETH
- 2x 400G NDR
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | MTP/MPO-16 APC |
| Interface | Singlemode |
| Compliance Code | DR8 |
| Operating Temperature | Standard |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 850 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 18 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 0.9 dB |
| Transmit min/max per lane | -3.5 dBm / 3.4 dBm |
| Receiver min/max per lane | -4.4 dBm / 4.2 dBm (overload) @800G |
| Wavelength TX (Typical) | 8x 1310 nm |
| Wavelength TX (Range) | 1305.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1310 nm |
| Laser | EML |
| Receiver Type | APD |
| Modulation | PAM4 @800G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 8x 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.