2x 400G Closed-Top OSFP DR4+ with dual CDR 2 km, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 2 km
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 2x 400G NDR
- 400G ETH
- 800G ETH
- 8x 100G ETH
- 8x 50G ETH
Specification
| Form Factor | OSFP |
|---|---|
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4+ |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 16 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 6.2 dB |
| Transmit min/max per lane | -0.2 dBm / 4 dBm |
| Receiver min/max per lane | -6.4 dBm / 4.5 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 8x 100G Ethernet, 8x 50G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
What customers say
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!