800G QSFP-DD BiDi VR4.2 with dual CDR 50 m, 8x 850 / 910 nm, MTP/MPO-8/12 APC, Multimode

- 8x 850 nm
- 50 m
- 850 G
- MTP/MPO-8/12
- 800G ETH
-
Matching Products
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | MTP/MPO-8/12 APC |
Interface | Multimode BiDi |
Compliance Code | BiDi VR4.2 |
Operating Temperature | Standard |
Modulation | PAM4 |
Distance | 50 m |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 850 Gbit/s |
---|---|
Bandwidth Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 14 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 1.7 dB |
Transmit min/max per lane | -4.6 dBm / 4 dBm |
Receiver min/max per lane | -6.3 dBm / 4 dBm (overload) @800G |
---|---|
Wavelength TX (Typical) | 850 nm, 850 nm, 850 nm, 850 nm, 910 nm, 910 nm, 910 nm, 910 nm |
Wavelength RX (Typical) | 850 nm, 850 nm, 850 nm, 850 nm, 910 nm, 910 nm, 910 nm, 910 nm |
Laser | VCSEL |
Receiver Type | PIN |
Modulation | PAM4 @800G |
Transmit and Dispersion Penalty | 4.4 dB |
Extinction Ratio | 2.5 dB |
Supported Protocols | 800G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.