400G QSFP-DD AOC with CDR (TX / RX) only Multimode Fiber, 1 - 100 m

Universal Active Optical Cable (AOC) with CDR (TX / RX), 1 - 100 m
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
QSFP-DD to QSFP-DD
PAM4 modulated signal
CDR only Version without DSP
Supported Datarate 425.04 Gbit/s
Modules are permanently attached to each end
Low power consumption < 16 W (less than 8 W per terminal)
Easy cable routing thanks to small diameter (Ø 2 mm) and bend radius
Connect different host systems by configuring each side individually
Specs
  • Fiber
  • 1m - 100m
  • 425.04 G
  • Active
Protocols
  • 400G ETH
Request compatibility
Part number
D.A854HG.z.R

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

2x
400G QSFP-DD SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode 
400G QSFP-DD SR8 with dual CDR | 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
181 pcs in stock As low as 458.42 EUR
+
MTP® APC to MTP® APC Multimode OM4 cable 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP&reg; APC to MTP&reg; APC Multimode OM4 cable | 16 Cores, MPO compliant, 50/125 &#181;m, purple, 0.5 m - 100 m
As low as 179.03 EUR

Specification

Compliance Code AOC
Form Factor QSFP-DD to QSFP-DD
Interface Active Optical Cable
Length 100 m
Temperature Range 0°C - 70°C
Bandwidth 425.04 Gbit/s
Digital Diagnostic Management (DDM) implemented
Power Consumption 16 W (8 W + 8 W)
CDR TX and RX
DSP no
Modulation PAM4
Supported Protocols 400G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger Schoefberger
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
More