400G QSFP-DD SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12 APC, Multimode
- 4x 850 nm
- 100 m
- 425 G
- MTP/MPO-8/12
- 100G ETH
- 200G ETH
- 400G ETH
- 4x 100G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | MTP/MPO-8/12 APC |
| Interface | Multimode |
| Compliance Code | SR4 |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 425 Gbit/s |
| Bandwith Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 8 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.7 dB |
| Transmit min/max per lane | -2.6 dBm / 3.5 dBm |
| Receiver min/max per lane | -6.3 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 4x 850 nm |
| Wavelength TX (Range) | 842 - 948 nm |
|---|---|
| Wavelength RX (Typical) | 4x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 4x 100G Ethernet, 400G Ethernet, 200G Ethernet, 100G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.