1G SFP BiDi ZX+ 120 km, ᵀˣ1550 / ᴿˣ1490 nm, DDM, LC-Simplex, Singlemode
SFP
BiDi ZX+
Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 120 km via Singlemode OS2
LC-Simplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
- 1550 nm
- 120 km
- 1.25 G
- BiDi
Protocols
- 100M ETH
- 1G ETH
- 1G FC
-
Matching Products
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZX+ |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 34 dB |
| Transmit min/max per lane | 1 dBm / 5 dBm |
| Receiver min/max per lane | -33 dBm / -8 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1544 - 1557.5 nm |
|---|---|
| Wavelength RX (Typical) | 1490 nm |
| Wavelength RX (Range) | 1470 - 1510 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma
XS News , Sr. System & Network Engineer
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
Stefan van Merriënboer
Senior ICT Consultant / Effisol