2.67G SFP STM-16 550 m, λ850 nm, DDM, LC-Duplex, Multimode
- 850 nm
- 550 m
- 2.67 G
- 100M ETH
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | STM-16 |
| Distance | 550 m |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 2.67 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 8 dB |
| Transmit min/max per lane | -10 dBm / 0 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @2G |
| Wavelength TX (Typical) | 850 nm |
| Wavelength TX (Range) | 830 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 850 nm |
| Wavelength RX (Range) | 760 - 860 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @2G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-SX-MMD compatible
- Marconi SU67AA compatible
- Nexans 88646015 compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.