10G SFP+ LRM 220 m, λ1310 nm, LC-Duplex, Multimode

Universal SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LRM Ethernet links
Supported Data Rates: 600 Mbit/s - 11.3 Gbit/s
Up to 220 m via Multimode OM2
LC-Duplex Connector
Specs
  • 1310 nm
  • 220 m
  • 11.3 G
Protocols
  • 10G ETH
  • 10G FC
  • 1G ETH
  • 8G FC
  • CPRI
  • OBSAI
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
P.1396.2M:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface Multimode
Compliance Code LRM
Distance 220 m
Temperature Range 0°C - 70°C
Bandwidth 600 Mbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 3.5 dB
Transmit min/max per lane -6.5 dBm / 0.5 dBm
Receiver min/max per lane -10 dBm / 1.5 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1355 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1555 nm
Laser FP
Receiver Type PIN
Modulation NRZ @10G
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # 12243 compatible
  • ADTRAN 1442401G1 compatible
  • ADVA # 12244 compatible
  • Aerohive Networks AH-ACC-SFP- 10G-LRM compatible
  • Alcatel-Lucent Ent. SFP-10G-LRM compatible
  • Allied Telesis AT-SP10LRM compatible
  • Arista 3rd_Party SFP-10G-SR compatible
  • Arista SFP-10G-SR compatible
  • Aruba Networks JW090A compatible
  • Avaya (ex. Nortel) AA1403017-E6 compatible
  • Brocade / Ruckus 10G-SFPP-LRM compatible
  • Brocade 10G-SFPP-LRM compatible
  • Brocade Brocade - XBR-000163 compatible
  • Check Point # 12248 compatible
  • Chelsio # 12249 compatible
  • Ciena (ex. Nortel) # 12250 compatible
  • Cisco (ex. Meraki) MA-SFP-10GB-LRM compatible
  • Cisco Systems SFP-10G-LRM compatible
  • Citrix Netscaler EW3F0000711 compatible
  • ComNet SFP-10G-LRM compatible
  • D-LINK DEM-435XT compatible
  • D-LINK DEM-435XT-DD compatible
  • Dell (ex. Force10) GP-10GSFP-1L compatible
  • Dell 407-10459 compatible
  • Dell 407-11196 compatible
  • Dell 407-BBED compatible
  • Dell 407-BBON compatible
  • Dell 430-4135 compatible
  • Delock 86171 compatible
  • Edge Core ET5402-SR compatible
  • Extreme (ex. Enterasys) 10GB-LRM-SFPP compatible
  • Extreme 10302 compatible
  • Extreme 10303 compatible
  • F5 Networks # 12252 compatible
  • FibroLAN SFPP-13-10 compatible
  • Fluke Networks OPVXG-SFP-PLUS-LRM compatible
  • Fortinet # 12254 compatible
  • Fortinet FS-TRAN-SFP+LRM compatible
  • Fujitsu S26361-F3986-E4 compatible
  • HP H3C JD093B compatible
  • Huawei OSXD22N00 compatible
  • Infinera (ex. Transmode) # 12268 compatible
  • Intel E10GSFPSR compatible
  • Juniper EX-SFP-10GE-LRM compatible
  • Juniper SFP-10GE-LRM compatible
  • Juniper SFPP-10GE-LRM compatible
  • Keymile # 12257 compatible
  • Keysight (ex. Ixia) LRM1310-PLUS compatible
  • KTI Networks # 12258 compatible
  • LANCOM SFP-SX-LC10 compatible
  • Lenovo (ex. Blade Network) # 12256 compatible
  • LevelOne SFP-6121 compatible
  • MikroTik S+31DLC10D compatible
  • Motorola # compatible
  • Moxa # 12262 compatible
  • MRV SFP-10GD-LRM compatible
  • Netgear AXM763 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04823AA compatible
  • Nokia Siemens Networks # 12265 compatible
  • Nvidia (ex. Mellanox) MFM1T02A-SR compatible
  • Oracle # compatible
  • Packetlight SL113 compatible
  • Palo Alto Networks PAN-SFP-PLUS-LR compatible
  • Perle PSFP-10GD-M2LC02 compatible
  • ProfiTap SFP+ LRM compatible
  • Radware # 12267 compatible
  • Ribbon (ex. ECI) # compatible
  • Solarflare SFM10G-LRM compatible
  • Supermicro AOC-E10GSFPLRM compatible
  • TP-LINK # compatible
  • Transition Networks # compatible
  • Ubiquiti Networks UF-MM-10G compatible
  • ZTE 180000278955 compatible
  • Zyxel # compatible
Your vendor / compatibility is missing?

What customers say

Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.

Arvid Picciani CEO / devguard GmbH
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn Telecommunications Infrastructure Security Professional
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery Necto Inc
More