400G QSFP-DD to 4x QSFP28 Breakout AOC with CDR (TX / RX) Multimode Fiber, 1 - 30 m
Universal Active Optical Cable (AOC) with CDR (TX / RX), 1 - 30 m
QSFP-DD to QSFP28
PAM4 modulated signal
Supports Datarates from 53.13 to 425.04 Gbit/s
Modules are permanently attached to each end
Low power consumption < 26 W (less than 10 W per terminal)
Easy cable routing thanks to small diameter (Ø 2 mm) and bend radius
Connect different host systems by configuring each side individually
Specs
- Fiber
- 1m - 30m
- 425.04 G
- Active
Protocols
- 100G ETH
- 400G ETH
Specification
Compliance Code | AOC Breakout |
---|---|
Form Factor | QSFP-DD to 4x QSFP28 |
Interface | Active Optical Cable |
Length | 30 m |
Temperature Range | 0°C - 70°C |
---|---|
Bandwidth | 425.04 Gbit/s |
Digital Diagnostic Management (DDM) | implemented |
Power Consumption | 26 W (10 W + 4x 4 W) |
CDR | TX and RX |
---|---|
Modulation | PAM4 |
Supported Protocols | 400G Ethernet, 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.
Elmar Gruber
H82 medientechnik GmbH
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma
XS News , Sr. System & Network Engineer
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz
Head of Network, STRATO AG