10G XFP ER with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1310 nm
  • 40 km
  • 11.1 G
Protocols
  • 10G ETH
  • 10G FC
  • 8G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1396.40:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code ER
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 8.5 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 16 dB
Transmit min/max per lane 0 dBm / 4 dBm
Receiver min/max per lane -16 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1290 - 1330 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @10G
Extinction Ratio 6 dB
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • ADTRAN 1442940G1 compatible
  • ADTRAN 1442940G1C compatible
  • ADVA # 13313 compatible
  • Allied Telesis # 13315 compatible
  • Avaya (ex. Nortel) # 13316 compatible
  • Brocade / Ruckus 10G-XFP-ER compatible
  • Ciena (ex. Nortel) NTTP80DA compatible
  • Cisco Systems XFP-10GER-192IR+ compatible
  • Dell (ex. Force10) GP-XFP-1E compatible
  • Extreme # 13320 compatible
  • Extreme (ex. Enterasys) # 13319 compatible
  • H3C (ex. 3COM) # 13312 compatible
  • Hirschmann # 13322 compatible
  • Hitachi # 13323 compatible
  • HP H3C # 13324 compatible
  • Huawei XFP-STM64-ER-SM1550 compatible
  • Infinera (ex. Transmode) TRX100071 compatible
  • Juniper (ex BTI Systems) # 13317 compatible
  • Juniper XFP-10G-E-OC192-IR2 compatible
  • Keysight (ex. Ixia) XSM1310 compatible
  • LevelOne # 13327 compatible
  • Marconi SU69BC compatible
  • MikroTik # 13328 compatible
  • Moxa # 13329 compatible
  • MRV # 13330 compatible
  • Net Insight NPA0038-IR21 compatible
  • NetOptics XFPKT-ER compatible
  • Nevion XFP-TR10-13T-ER compatible
  • Nokia (ex. Alcatel-Lucent) 3FE50712CA compatible
  • Nokia Siemens Networks # 13331 compatible
  • Nortel / Juniper / NSN XFP-LR40 compatible
  • Packetlight SL103 compatible
  • Palo Alto Networks # 13332 compatible
  • Radware # 13333 compatible
  • Ribbon (ex. ECI) OTR64_PI3 compatible
Your vendor / compatibility is missing?

What customers say

We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
Laert Klemo CTO, Eagle Security System

The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.

Sebastian Giss System Engineer/cyon.ch

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
More