10G XFP DWDM ZR+ with dual CDR100 km / 25 dB, 100 GHz Grid - C-Band, LC

XFP DWDM ZR+ SMF 1563.86nm C17, 100km/ 25dB
X.1696.25.yy
XFP
DWDM ZR+
  • Universal XFP Transceiver - 100 GHz Grid - C-Band
  • Use FLEXBOX to configure to almost any vendor
  • DWDM for multiple applications over one duplex fiber
  • For 10GBASE-ZR+ Ethernet links
  • Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
  • Powerbudget of 25 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Specs
DWDM 100 GHz 100 km 11.1 G Dual CDR
Protocols
10G ETH 10G FC OTU2 STM-64

* Required Fields

Part number
X.1696.25.yy
Availability
4-6 weeks after ordering
List price
1,036.84 EUR
Your price
from 944.84 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    XFP
  • Connector / Polish
    LC Duplex / PC
  • Interface
    DWDM
  • Type
    DWDM ZR+
  • Distance
    100 km
  • Temperature range
    -5°C - 70°C
  • Bandwidth
    9.95 Gbit/s - 11.1 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    3.5 W
  • CDR
    TX and RX
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    25 dB
  • Transmit min/max
    0 dBm / 4 dBm
  • Receiver min/max
    -25 dBm / -7 dBm (overload)
  • Wavelength Rx (range)
    1520 - 1600 nm
  • Laser
    EML
  • Receiver Type
    APD
  • Transmit and Dispersion Penalty
    3 dB
  • Dispersion Tolerance
    -500 ps/nm to 1,450 ps/nm
  • Extinction Ratio
    9 dB
  • Protocols
    10G Ethernet, 10G FC, OTU2, STM-64

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

Your vendor / compatibility
is missing?

What Customers say

  • "FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low."
    Sven Gebhardt
    Head of Platforms & Services, grandcentrix GmbH
  • "We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!"
    Nick Derksen
    Infrastructure Engineer, Previder B.V
  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
More