10G XFP BiDi LR with dual CDR 20 km, ᵀˣ1330 / ᴿˣ1270 nm, LC-Simplex, Singlemode
XFP
BiDi LR
Universal XFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 20 km via Singlemode OS2
LC-Simplex Connector
Specs
- 1330 nm
- 20 km
- 11.1 G
- BiDi
Protocols
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 12 dB |
| Transmit min/max per lane | -2 dBm / 3 dBm |
| Receiver min/max per lane | -14 dBm / 0.5 dBm (overload) @10G |
| Wavelength TX (Typical) | 1330 nm |
| Wavelength TX (Range) | 1320 - 1340 nm |
|---|---|
| Wavelength RX (Typical) | 1270 nm |
| Wavelength RX (Range) | 1260 - 1280 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061701892-01 compatible
- Allied Telesis # 13496 compatible
- Avaya (ex. Nortel) AA1403001-E5 compatible
- Brocade / Ruckus 10G-XFP-LR compatible
- Calix 100-03898 compatible
- Cisco Systems XFP-10GLR-OC192SR compatible
- Dell (ex. Force10) # 13500 compatible
- Extreme (ex. Enterasys) 10GBASE-LR-XFP compatible
- Extreme 10122 compatible
- Fortinet FG-TRAN-XFPLR compatible
- H3C (ex. 3COM) # 13493 compatible
- Hirschmann # 13501 compatible
- Hitachi # 13502 compatible
- HP H3C JD108B compatible
- Huawei OSX010B00 compatible
- Infinera (ex. Transmode) # 13512 compatible
- Juniper (ex BTI Systems) # 13498 compatible
- Juniper XFP-10GE-LR compatible
- LevelOne # 13505 compatible
- MikroTik # 13506 compatible
- Moxa # 13507 compatible
- MRV # 13508 compatible
- Nokia (ex. Alcatel-Lucent) 3HE05831CA compatible
- Nokia Siemens Networks V50017-U770-K500 compatible
- Palo Alto Networks # 13510 compatible
- Radware # 13511 compatible
- Ribbon (ex. ECI) # 13499 compatible
Your vendor / compatibility is missing?
What customers say
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg
CTO - Icera Networks
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
James Rice
Jump Networks Ltd
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections