40G QSFP+ DAC Passive Copper Cable, 0.5 - 5 m
QSFP+ to QSFP+
DAC
Universal Direct Attached Cable (DAC), 0.5 - 5 m
Use FLEXBOX to configure to almost any vendor
QSFP+ to QSFP+
Supports Datarates from 2.5 to 41.2 Gbit/s
Modules are permanently attached to each end
Low power consumption < 2 W (less than 1 W per terminal)
Connect different host systems by configuring each side individually
Specs
- Twinax
- 0.5m - 5m
- 41.2 G
Protocols
- 10G ETH
- 40G ETH
Specification
| Compliance Code | DAC |
|---|---|
| Form Factor | QSFP+ to QSFP+ |
| Interface | Direct Attached Cable |
| Length | 5 m |
| Temperature Range | -5°C - 85°C |
|---|---|
| Bandwidth | 10 Gbit/s - 41.2 Gbit/s |
| Digital Diagnostic Management (DDM) | not implemented |
| Power Consumption | 2 W (1 W + 1 W) |
| CDR | none |
|---|---|
| Modulation | NRZ |
| Supported Protocols | 40G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 13041 compatible
- Alcatel-Lucent Ent. QSFP-40G-C3M compatible
- Allied Telesis AT-QSFP3CU compatible
- Arista 3rd_Party CAB-Q-Q-5M compatible
- Arista CAB-Q-Q-5M compatible
- Aruba Networks(ex. HP Network) JH236A compatible
- Avaya (ex. Nortel) AA1404032-E6 compatible
- Brocade 40G-QSFP-QSFP-C-0501 compatible
- Chelsio QTAPCABLE5M compatible
- Cisco (ex. Meraki) MA-CBL-40G-3M compatible
- Cisco Systems QSFP-H40G-CU5M compatible
- Cumulus Networks DAC-5M compatible
- D-LINK DEM-CB500QXS compatible
- Dell (ex. Force10) CBL-QSFP-40GE-PASS-5M compatible
- Dell 470-AAVR compatible
- Dell DAC-QSFP-40G-5M compatible
- EMC 851-0255 compatible
- Extreme (ex. Enterasys) # 13043 compatible
- Extreme 10323 compatible
- Fortinet SP-CABLE-FS-QSFP+5 compatible
- Huawei QSFP-40G-CU5M compatible
- Intel XLDACBL5 compatible
- Juniper EX-QSFP-40GE-DAC-5M compatible
- Juniper JNP-QSFP-DAC-5M compatible
- LANCOM SFP-DAC40-3M compatible
- Lenovo (ex. Blade Network) BN-QS-QS-CBL-5M compatible
- Lenovo (ex. IBM) 00D5809 compatible
- Lenovo (ex. IBM) 00D5810 compatible
- MikroTik DAC-QSFP-40G-5M compatible
- MRV # 13045 compatible
- NetApp X6559-R6 compatible
- NetApp X66100-5 compatible
- Netgear AXLC763 compatible
- Nvidia (ex. Mellanox) MC2210126-005 compatible
- Nvidia (ex. Mellanox) MC2210128-005 compatible
- Oracle X2121A-5M-N compatible
- Packetlight QSFP+-LR-1102 compatible
- Palo Alto Networks QSFP+ DAC 5m compatible
- Planet CB-DAQSFP-2M compatible
- QNAP DAC-5M compatible
- Quanta # 13047 compatible
- Radware # 13048 compatible
- Solarflare SOLR-QSFPQSFP-5M compatible
- Spirent ACC-6085A compatible
- Supermicro CBL-NTWK-0422-01 compatible
Your vendor / compatibility is missing?
What customers say
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma
XS News , Sr. System & Network Engineer
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham
Senior Network Engineer - Airspeed Telecom
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
Stefan van Merriënboer
Senior ICT Consultant / Effisol