10G XFP LR with dual CDR 20 km, λ1310 nm, LC-Duplex, Singlemode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 9.95 Gbit/s - 10.3 Gbit/s
Up to 20 km via Singlemode OS2
LC-Duplex Connector
Specs
  • 1310 nm
  • 20 km
  • 10.3 G
Protocols
  • 10G ETH
  • 10G FC
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
X.1396.20:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
10G XFP LR with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode 
10G XFP LR with dual CDR | 10 km, λ1310 nm, LC-Duplex, Singlemode
1513 pcs in stock As low as 82.29 EUR
Higher Power Budget
10G XFP ER with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode 
10G XFP ER with dual CDR | 40 km, λ1310 nm, LC-Duplex, Singlemode
27 pcs in stock As low as 154.71 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code LR
Distance 20 km
Temperature Range 0°C - 70°C
Bandwidth 9.95 Gbit/s - 10.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 11 dB
Transmit min/max per lane -3 dBm / 2 dBm
Receiver min/max per lane -14 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1290 - 1330 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @10G
Extinction Ratio 6 dB
Supported Protocols 10G Ethernet, 10G FC, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • ADTRAN 1442920G1 compatible
  • ADVA 0061701811-03 compatible
  • ADVA 1061701833-02 (8G) compatible
  • Allied Telesis AT-XPLR compatible
  • Avaya (ex. Nortel) AA1403001-E5 compatible
  • Cisco Systems XFP-10GLR-OC192SR compatible
  • Cyan 280-0014-00 compatible
  • Dell (ex. Force10) GP-XFP-1L compatible
  • Extreme (ex. Enterasys) 10GBASE-LR-XFP compatible
  • Extreme 10122 compatible
  • H3C (ex. 3COM) 3CXFP92 compatible
  • Hirschmann M-XFP-LR/LC compatible
  • Hitachi 10GBASE-LR compatible
  • HP H3C JD108B compatible
  • Huawei XFP-STM64-LX-SM1310 compatible
  • Infinera (ex. Transmode) TRX100044 compatible
  • Juniper (ex BTI Systems) BP3AM4MS compatible
  • Juniper XFP-10G-L-OC192-SR1 compatible
  • Keysight (ex. Ixia) XSM1310 compatible
  • LevelOne XFP-5211 compatible
  • MikroTik # 11954 compatible
  • Moxa # 11955 compatible
  • MRV XFP-10GD-LR compatible
  • NetOptics XFPKT-LR compatible
  • Nokia (ex. Alcatel-Lucent) 1AB214540001 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE50712BA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00564CAA compatible
  • Nokia Siemens Networks V50017-U770-K500 compatible
  • Nokia-Siemens (ex. Atrica) AT10101 compatible
  • Packetlight SL101 compatible
  • Palo Alto Networks PAN-XFP-LR compatible
  • Radware 9062106 compatible
  • Ribbon (ex. ECI) OTR103_LR compatible
  • Ribbon (ex. ECI) OTR64_PI3 compatible
  • Transition Networks TN-XFP-LR compatible
Your vendor / compatibility is missing?

What customers say

For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!

Viktor Ekmark Cloud Infrastructure Engineer / Elastx AB
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer/ Surrey Satellite Technology Limited
More