10G XFP LR Industrial with dual CDR 20 km, λ1330 nm, LC-Duplex, Singlemode
- 1330 nm
- 20 km
- 11.3 G
- Industrial
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | LR |
Distance | 20 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 9.95 Gbit/s - 11.3 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 12 dB |
Transmit min/max per lane | -2 dBm / 3 dBm |
Receiver min/max per lane | -14 dBm / 0.5 dBm (overload) @10G |
Wavelength TX (Typical) | 1330 nm |
Wavelength TX (Range) | 1320 - 1340 nm |
---|---|
Wavelength RX (Typical) | 1270 nm |
Wavelength RX (Range) | 1260 - 1280 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @10G |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!