10G XFP, 100 GHz Grid - C-Band DWDM ZR with dual CDR Extended 80 km / 23 dB, LC-Duplex

Universal XFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ZR Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 23 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
  • DWDM 100 GHz
  • 80 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
X.1696.23.yy.I

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Temperature Range
10G XFP, 100 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex 
10G XFP, 100 GHz Grid - C-Band DWDM ZR with dual CDR | 80 km / 23 dB, LC-Duplex
As low as 548.90 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ZR
Distance 80 km
Temperature Range -20°C - 75°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 23 dB
Transmit min/max per lane 0 dBm / 4 dBm
Receiver min/max per lane -23 dBm / -10 dBm (overload) @10G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1520 - 1620 nm
Laser EML
Receiver Type APD
Modulation NRZ @10G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems XFP-10GZR-OC192LR compatible
Your vendor / compatibility is missing?

What customers say

In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer

Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.

Christian Brasolin Senior System Engineer / Netica SRL
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
James Rice Jump Networks Ltd
More