10G XFP, 50 GHz Grid - C-Band DWDM ER with dual CDR Extended 40 km / 14 dB, LC-Duplex

Universal XFP Transceiver - 50 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ER Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 14 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
  • DWDM 50 GHz
  • 40 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.1696.14.yyy.I

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ER
Distance 40 km
Temperature Range -20°C - 75°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 14 dB
Transmit min/max per lane -1 dBm / 4 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) Channel 595 - 1529.94 nm
Wavelength RX (Range) 1270 - 1600 nm
Laser EML
Receiver Type PIN
Modulation NRZ @10G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard (Default) X.1696.14.525.I compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT

We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!

Matthias Götz Managing Director / Blue Taurus GmbH & Co. KG

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
More