10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR Extended 40 km / 14 dB, LC-Duplex

Universal XFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ER Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.1 Gbit/s with dual CDR
Powerbudget of 14 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 75°C
Specs
  • DWDM 100 GHz
  • 40 km
  • 11.1 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
X.1696.14.yy.I

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Temperature Range
10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR 40 km / 14 dB, LC-Duplex 
10G XFP, 100 GHz Grid - C-Band DWDM ER with dual CDR | 40 km / 14 dB, LC-Duplex
As low as 460.85 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ER
Distance 40 km
Temperature Range -20°C - 75°C
Bandwidth 9.95 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 14 dB
Transmit min/max per lane -1 dBm / 4 dBm
Receiver min/max per lane -15 dBm / 0.5 dBm (overload) @10G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1270 - 1620 nm
Laser EML
Receiver Type PIN
Modulation NRZ @10G
Transmit and Dispersion Penalty 2 dB
Extinction Ratio 8.2 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard (Default) P.1696.14.61.I compatible
  • Cisco Systems XFP-10GER compatible
Your vendor / compatibility is missing?

What customers say

The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner Managing Director, Allegro Packets GmbH
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer
More