10G XFP ER Industrial with dual CDR 40 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 11.1 G
- Industrial
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | ER |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2.5 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 16 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -16 dBm / 0.5 dBm (overload) |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1355 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1600 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Dell (ex. Force10) GP-XFP-1E compatible
- Huawei XFP-STM64-ER-SM1550 compatible
- Infinera (ex. Transmode) TRX100071 compatible
- Juniper XFP-10G-E-OC192-IR2 compatible
- Marconi SU69BC compatible
- Nokia (ex. Alcatel-Lucent) 3FE50712CA compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.