10G SFP+ Tunable DWDM ZR | 80 km, 80 Channels, 50 GHz Grid - C-Band, LC

10Gigabit & STM64 Tunable DWDM 50GHz SFP+
P.1696.23.xT
SFP+
DWDM ZR
  • Universal DWDM Tunable SFP+ Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • Set channels using your FLEXBOX - more on our blog
  • Reduce spare part stock for your DWDM network
  • Supported Data Rates: 10 Gbit/s - 11.3 Gbit/s
  • Up to 80 km via Singlemode OS2 G.652 fiber (SMF)
Specs
DWDM 50Ghz 80 km 11.3 G Tunable
Protocols
10G ETH 10G FC STM64
Choose config method
Compatible to
Part number
P.1696.23.xT
Ships today Order until 4 PM (German time)
17 pcs
Your price
2,394.00 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP+
  • Connector
    LC
  • Interface
    DWDM
  • Wavelength TX
    1528.38 nm
  • Wavelength RX
    1528 nm
  • Distance
    80 km
  • Powerbudget (dB)
    23 dB
  • Transmit min.
    -1 dBm
  • Receive min.
    -24 dBm
  • Transmit max.
    3 dBm
  • Receive max. (Receiver overload)
    -7 dBm
  • Transmit and Dispersion Penalty
    2 dB
  • Extinction Ratio
    9 dB
  • Bandwidth from
    10.0 G
  • Bandwidth to
    11.3 G
  • Laser
    ILMZ
  • Receiver Type
    APD
  • Wavelength TX min.
    1528.38nm
  • Wavelength TX max.
    1568.77nm
  • Wavelength RX min.
    1525nm
  • Wavelength RX max.
    1570nm
  • Temperature range
    -5°C - 70°C
  • Digital Diagnostic Management (DDM)
    internally calibrated
  • Protocols
    10Gigabit Ethernet, 10Gigabit Fibre Channel, STM64
  • Type
    DWDM ZR
  • Temperature (min)
    -5°C
  • Temperature (max)
    70°C

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Related know how

  • DWDM OSNR values for P.1696.23.xT

    OSNR Characteristics with External CDR for for FLEXOPTIX tunable DWDM P.1696.23.xT (*)
    at different datarates, Bit-Error-Rates, Rx Input Power Ranges, and dispersion levels.

    Data Rate (gbps) BER Dispersion (ps/nm) Rx Power Range (dBm) OSNR (dB)
    10.709 1E-4 0 -7 to -18 16
    10.709 1E-4 -400 to +1450 -7 to -18 19
    11.1 1E-4 0 -7 to -18 17
    11.1 1E-4 -400 to +1450 -7 to -18 20
    9.95
    10.3
    10.5
    1E-12 0 -7 to -24 30
    9.95
    10.3
    10.5
    1E-12 0 -7 to -19 25
    9.95
    10.3
    10.5
    1E-12 -400 to +1450 -7 to -19 26

    (*) For all technology loving people: There is a balance or better a direct relation between Data Rate, BER (Bit-Error-Rate), Chromatic Dispersion (CD), Rx Power Range and OSNR (Optical-Signal-to-Noise-Ratio). A high gap between Signal-Level and Noise-Level results in a low BER. To achieve this big gap the input power needs to be higher than with lower BER and same OSNR. If you consider the Cromatic Disperion, too you need to have around 3-4dB more input power than without Chromatic Dispersion. This 3-4dB are known as Dispersion Penalty which has to be considered when CD is in given range. This is almost the same for all data-rates around 10G. (here 10.709-11.1 gbps) If you for example compare this with a 1G signal the OSNR can be much lower because of higher signal spacing.

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • Accedian Networks 7SP-402 compatible
  • ADVA 1061702000-01 compatible
  • ADVA 1061702000-02 compatible
  • Arista Networks SFP-10G-DZ-T compatible
  • Avaya (ex. Nortel) AA1403016-E6 compatible
  • Brocade 10G-SFPP-ZR compatible
  • Brocade 10G-SFPP-ZRD-T compatible
  • Brocade XBR-000174 compatible
  • Ciena XCVR-T80W01 compatible
  • Cisco Systems DWDM-SFP10G-50.12 compatible
  • Cisco Systems DWDM-SFP10G-C compatible
  • Cisco Systems ONS-SC+-10G-C compatible
  • Cisco Systems SFP-10G-ZR compatible
  • Coriant (ex. Tellabs) 81.71T-SPDWDM-R6 compatible
  • Cyan 280-0451-00 compatible
  • Dell (ex. Force10) GP-10GSFP-Wxx compatible
  • ECI OTP10T_17_ALLN compatible
  • Ericsson RDH901032/1 compatible
  • Extreme 10325 compatible
  • Huawei OSX080N01 compatible
  • Infinera (ex. Transmode) TRX100117/TC compatible
  • Intel E10GSFPLR compatible
  • Juniper SFP-10GE-ZR compatible
  • Juniper SFPP-10G-CT50-ZR compatible
  • Juniper SFPP-10G-DT-ZRC2 compatible
  • MRV SFP-10GDWZR-TC compatible
  • Nevion SFP-TR10-TD15xx.xx-ZR compatible
  • Nokia (ex. Alcatel-Lucent) 3HE08142BA compatible
  • Transition Networks TN-10GSFP-LR7 compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Die FLEXBOX ist ein tolles Gerät mit dem man ganz einfach die Optiken von Flexoptix an verschiedene Netzwerkgeräte anpassen kann. Egal, ob das Juniper, HP, Dell, Cisco oder noch etwas anderes ist. Die Optiken werden richtig erkannt und alle Parameter können ausgelesen werden. Die Konfiguration der Optiken erfolgt über intuitive Web-Oberfläche (sogar über Handy)."
    Katja Weber
    Department Assistant IT & Operations, Neofonie GmbH
  • "Herrlich unkompliziert und flexibel die SFPs den Anforderungen entsprechend zu konfigurieren. Und wenn es mal wieder brenzlig wird, sogar auf der Fahrt zum Kunden mit der Mobile App schnell das Modul geflasht! Großartige Box und für mich das Netzwerk Tool des Jahres!"
    Ricardo Wachs
    System Administration, Studio Funk GmbH & Co. KG
  • "Einfacher geht es nicht! Die Programmierung der SFPs kann ohne Einweisung durch jeden IT-Mitarbeiter durchgeführt werden. Der für uns wichtigste Punkt ist aber, dass wir endlich nicht mehr für jeden Hersteller SFPs vorhalten müssen. Ein paar FLEXOPTIX-SFPs genügen."
    Philipp Päper
    IT-Systemadministrator, Landkreis Lüneburg
More