1G SFP CWDM ZX+ Extended ~160 km / 41 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 1.05 Gbit/s - 1.25 Gbit/s
Powerbudget of 41 dB for up to 160 km using an OS2 ITU-T G.652 fiber
Operating Temperature from -20°C to 85°C
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~160 km / 41 dB
  • 1.25 G
  • Industrial
Protocols
  • 1G ETH
  • 1G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1612.41.xDI

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM ZX+
Distance 160 km
Temperature Range -20°C - 85°C
Bandwidth 1.05 Gbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Externally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 41 dB
Transmit min/max per lane 4 dBm / 7 dBm
Receiver min/max per lane -37 dBm / -10 dBm (overload) @1G
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ @1G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # compatible
  • ADTRAN # compatible
  • ADVA # compatible
  • Allied Telesis AT-SPZX160 compatible
  • Arista 3rd_Party SFP-1G-LX compatible
  • Arista SFP-1G-LX compatible
  • Aruba Networks(ex. HP Network) J4860C compatible
  • Avaya (ex. Nortel) AA1419061-E6 compatible
  • Brocade # compatible
  • Brocade / Ruckus E1MG-CWDM80-1610 compatible
  • Check Point # compatible
  • Ciena (ex. Nortel) # compatible
  • Cisco Systems CWDM-SFP-1610 compatible
  • D-LINK # compatible
  • Dell # compatible
  • Extreme 10053 compatible
  • F5 Networks # compatible
  • FibroLAN SSF1G-LX7-5C-61 compatible
  • Fluke Networks # compatible
  • Force10 / Juniper # compatible
  • Fortinet # compatible
  • Fujitsu # compatible
  • H3C (ex. 3COM) # compatible
  • Hirschmann # compatible
  • HP H3C # compatible
  • Huawei # compatible
  • Infinera (ex. Transmode) # compatible
  • Intel # compatible
  • Juniper (ex BTI Systems) # compatible
  • Juniper SFP-1GE-LH compatible
  • Keymile # compatible
  • KTI Networks # compatible
  • LANCOM # compatible
  • Lenovo (ex. Blade Network) # compatible
  • LevelOne # compatible
  • Lynx # compatible
  • Motorola # compatible
  • Moxa # compatible
  • MRV # compatible
  • Netgear # compatible
  • Nokia (ex. Alcatel-Lucent) CWDM-SFP-1610 compatible
  • Nokia Siemens Networks # compatible
  • Packetlight UL-CWDM-1G-HP-CH1610 compatible
  • Palo Alto Networks # compatible
  • Radware # compatible
  • Ribbon (ex. ECI) # compatible
  • TP-LINK # compatible
  • Transition Networks TN-SFP-LX16-61 compatible
  • Ubiquiti Networks # compatible
  • Waystream (ex. Packetfront) # compatible
  • Zyxel SFP-ZX-80 compatible
Your vendor / compatibility is missing?

What customers say

Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day. With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably. Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver. We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field. Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers CEO/CTO, Oufti Connections
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek Network Architect, Cloud4com

FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.

Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies. 

Reijo Hakala Specialist / DNA Ltd.
More