STM-4 SFP CWDM Extended ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~140 km / 39 dB
- 622 M
- Industrial
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Compliance Code | CWDM STM-4 |
Distance | 140 km |
Temperature Range | -20°C - 85°C |
Bandwidth | 100 Mbit/s - 622 Mbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 39 dB |
Transmit min/max per lane | 2 dBm / 7 dBm |
Receiver min/max per lane | -37 dBm / -10 dBm (overload) @100M - 800M |
Wavelength TX (Typical) | Channel R - 1610 nm |
Wavelength RX (Range) | 1100 - 1650 nm |
Laser | DFB |
---|---|
Receiver Type | APD |
Modulation | NRZ @100M - 800M |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.