100M SFP BiDi LX 10 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode
- 1310 nm
- 10 km
- 155 M
- BiDi
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Type | BiDi LX |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 155 Mbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 13 dB |
Transmit min/max per lane | -15 dBm / -8 dBm |
Receiver min/max per lane | -28 dBm / -8 dBm (overload) |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1250 - 1350 nm |
---|---|
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1500 - 1600 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ |
Extinction Ratio | 8.2 dB |
Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Avaya (ex. Nortel) AA1419082-E5 compatible
- Brocade / Ruckus E1MG-100FX-IR compatible
- Ciena XCVR-A10S31 compatible
- Cisco Systems (ex. Linksys) MFEBX1 compatible
- Cisco Systems GLC-FE-100BX-U compatible
- Cisco Systems ONS-SI-155-I1 compatible
- ComNet SFP-10A compatible
- Extreme 10059 compatible
- Huawei SFP-FE-LX-SM1310-BIDI compatible
- Juniper EX-SFP-FE20KT13R15 compatible
- Keymile 37973061 compatible
- Marconi SU66AE compatible
- Nexans 88645902 compatible
- Nokia (ex. Alcatel-Lucent) 3FE29195AA01 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00869AA compatible
- Nokia Siemens Networks V50017-U403-K500 compatible
- Perle PSFP-100D-S1LC10U compatible
- Ribbon (ex. ECI) OTR1_S3BD compatible
- Zyxel SFP-100BX1310-10 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.