1G SFP BiDi ZX+ Extended 120 km, ᵀˣ1570 / ᴿˣ1510 nm, DDM, LC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 120 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -20°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
  • 1570 nm
  • 120 km
  • 1.25 G
  • Extended
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.B1612.B.PMDIL:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Temperature Range
1G SFP BiDi ZX+ 120 km, ᵀˣ1570 / ᴿˣ1510 nm, DDM, LC-Simplex, Singlemode 
1G SFP BiDi ZX+ | 120 km, ᵀˣ1570 / ᴿˣ1510 nm, DDM, LC-Simplex, Singlemode
0 pcs in stock As low as 144.84 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Compliance Code BiDi ZX+
Distance 120 km
Temperature Range -20°C - 85°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 33 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -33 dBm / -8 dBm (overload) @1G
Wavelength TX (Typical) 1570 nm
Wavelength TX (Range) 1564 - 1577.5 nm
Wavelength RX (Typical) 1510 nm
Wavelength RX (Range) 1490 - 1530 nm
Laser DFB
Receiver Type APD
Modulation NRZ @1G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 9 dB
Supported Protocols 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # compatible
  • ADTRAN # compatible
  • ADVA # compatible
  • Allied Telesis # compatible
  • Arista 3rd_Party SFP-1G-LX compatible
  • Arista SFP-1G-LX compatible
  • Aruba Networks(ex. HP Network) # compatible
  • Avaya (ex. Nortel) # compatible
  • Brocade # compatible
  • Check Point # compatible
  • Ciena (ex. Nortel) # compatible
  • Cisco Systems GLC-BX80-D-I compatible
  • D-LINK # compatible
  • Dell # compatible
  • Dell (ex. Force10) # compatible
  • Edge Core # compatible
  • Ericsson # compatible
  • Extreme (ex. Enterasys) # compatible
  • F5 Networks # compatible
  • FibroLAN # compatible
  • Fluke Networks # compatible
  • Fortinet # compatible
  • Fujitsu # compatible
  • H3C (ex. 3COM) # compatible
  • Hirschmann SFP-GIG-BA LX/LC compatible
  • HP H3C # compatible
  • Huawei # compatible
  • Infinera (ex. Transmode) # compatible
  • Intel # compatible
  • Juniper (ex BTI Systems) # compatible
  • Juniper SRX-SFP-1GE-LX compatible
  • Keymile 37973100 compatible
  • KTI Networks # compatible
  • LANCOM # compatible
  • Lenovo (ex. Blade Network) # compatible
  • LevelOne # compatible
  • Lynx # compatible
  • MikroTik # compatible
  • Motorola # compatible
  • Moxa # compatible
  • MRV # compatible
  • Netgear # compatible
  • Nokia (ex. Alcatel-Lucent) 1AB393080010 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE01389CA compatible
  • Nokia Siemens Networks # compatible
  • Nvidia (ex. Mellanox) # compatible
  • Palo Alto Networks # compatible
  • Quanta # compatible
  • Radware # compatible
  • Ribbon (ex. ECI) # compatible
  • TP-LINK # compatible
  • Transition Networks # compatible
  • Ubiquiti Networks UF-SM-1G-S YE compatible
  • Waystream (ex. Packetfront) # compatible
  • Westermo 1100-0527 compatible
  • Zyxel # compatible
Your vendor / compatibility is missing?

What customers say

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James Engineering Inspector, Tata Steel Strip Products UK
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
More