1G SFP BiDi LX 3 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-LX Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 3 km via Singlemode OS2
LC-Simplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 3 km
  • 1.25 G
  • BiDi
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.B1312.03.DL:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi LX
Distance 3 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 8 dB
Transmit min/max per lane -14 dBm / -8 dBm
Receiver min/max per lane -22 dBm / -3 dBm (overload)
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1360 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1480 - 1580 nm
Laser FP
Receiver Type PIN
Modulation NRZ
Extinction Ratio 6 dB
Supported Protocols 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-BX-U compatible
  • Fortinet FG-TRAN-LX compatible
  • Juniper EX-SFP-GE10KT13R15 compatible
  • MikroTik S-35LC20D compatible
  • Netgear AGM732F compatible
  • Siemens SFP992-1LD. compatible
  • TP-LINK TL-SM311LS compatible
  • Ubiquiti Networks UF-SM-1G-S BU compatible
Your vendor / compatibility is missing?

What customers say

The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!

Viktor Ekmark Cloud Infrastructure Engineer / Elastx AB
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
Sylvain Brisebois Advance Research, Senior Firmware Engineer, KINOVA

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More