100M SFP BiDi LX Industrial 2 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Multimode
- 1310 nm
- 2 km
- 155 M
- Industrial
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Multimode BiDi |
Type | BiDi LX |
Distance | 2 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 125 Mbit/s - 155 Mbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 10 dB |
Transmit min/max per lane | -20 dBm / -10 dBm |
Receiver min/max per lane | -30 dBm / -8 dBm (overload) |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1360 nm |
---|---|
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1500 - 1580 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ |
Extinction Ratio | 9 dB |
Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Moxa SFP-1FEMLC-T compatible
- Nokia (ex. Alcatel-Lucent) iSFP-100-BX-U compatible
What customers say
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!