50G SFP56 SR with dual CDR 100 m, λ850 nm, LC-Duplex, Multimode
- 850 nm
- 100 m
- 53.13 G
- 50G ETH
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP56 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Multimode |
Compliance Code | SR |
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Bandwidth | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2.5 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 3.9 dB |
Transmit min/max per lane | -4.5 dBm / 3 dBm |
Receiver min/max per lane | -8.4 dBm / 4 dBm (overload) @50G |
Wavelength TX (Typical) | 850 nm |
Wavelength TX (Range) | 840 - 860 nm |
Wavelength RX (Typical) | 850 nm |
Wavelength RX (Range) | 840 - 860 nm |
---|---|
Laser | VCSEL |
Receiver Type | IDP |
Modulation | PAM4 @50G |
Transmit and Dispersion Penalty | 4.5 dB |
Extinction Ratio | 3 dB |
Supported Protocols | 50G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.