25G SFP28 LR Industrial with dual CDR 20 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 20 km
- 25.78 G
- Industrial
- 10G ETH
- 25G ETH
- CPRI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR |
| Distance | 20 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 24.33 Gbit/s - 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1.2 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 10.5 dB |
| Transmit min/max per lane | 0 dBm / 6 dBm |
| Receiver min/max per lane | -10.5 dBm / 3 dBm (overload) @25G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1295 - 1325 nm |
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
|---|---|
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @25G |
| Transmit and Dispersion Penalty | 2.7 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 25G Ethernet, 10G Ethernet, LTE 24.33G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party SFP-25G-LR compatible
- Arista SFP-25G-LR compatible
- Cisco Systems SFP-10/25G-LR-S compatible
- MikroTik XS+2733LC15D compatible
What customers say
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!