800G OSFP DR8 with dual CDR500 m, 8x λ1310 nm, MTP/MPO-16 APC, Singlemode

800G OSFP DR8 with dual CDR | 500 m, 8x λ1310 nm, MTP/MPO-16 APC, Singlemode
O.138HG.05
OSFP
DR8
  • Universal OSFP Transceiver
  • Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
  • For 800GBASE-DR8 Ethernet links
  • Integrated Clock-Data-Recovery (CDR)
  • PAM4 modulated signal
  • Supported Data Rates: 850 Gbit/s (8x 106.25 Gbit/s)
  • Up to 500 m via Singlemode OS2
  • Use ONLY with MTP/MPO-16 APC connectors
Specs
8x 1310 nm 500 m 850 G MTP/MPO-16
Protocols
100G ETH 800G ETH
Choose config method
Compatible to

* Required Fields

Part number
O.138HG.05
Availability
on request
Your price
3,990.00 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    OSFP
  • Connector / Polish
    MTP/MPO-16 APC
  • Interface
    Singlemode
  • Type
    DR8
  • Distance
    500 m
  • Temperature range
    0°C - 70°C
  • Lane Count
    8x (Tx/Rx)
  • Bandwidth
    850 Gbit/s
  • Bandwidth per Lane
    106.25 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    16 W
  • CDR
    TX and RX
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    2.7 dB
  • Transmit min/max per lane
    0.8 dBm / 4.2 dBm
  • Receiver min/max per lane
    -1.9 dBm / 4.2 dBm (overload)
  • Wavelength Tx (typical)
    8x 1310 nm
  • Wavelength Tx (range)
    1304.5 - 1317.5 nm
  • Wavelength Rx (typical)
    8x 1310 nm
  • Laser
    EML
  • Receiver Type
    PIN
  • Modulation
    PAM4
  • Transmit and Dispersion Penalty
    3.4 dB
  • Extinction Ratio
    3.5 dB
  • Protocols
    100G Ethernet, 800G Ethernet

How to configure transceiver using your FLEXSOX

Slide your FLEXSOX into your FLEXBOX

1 Slide-In

  • Slide your FLEXBOX V4 into your FLEXSOX
  • Connect it via USB
  • Start our FLEXOPTIX App

Insert a Universal Transceiver

2 Insert a transceiver

  • Insert a Universal Transceiver into the corresponding slot
Select and Configure

3 Select and configure

  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use With Device

4 Use with device

  • Use the transceiver in your device.
    That's it!
  • Need it for another device?
    Just re-configure it again and again!

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility
is missing?

What Customers say

  • "FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low."
    Sven Gebhardt
    Head of Platforms & Services, grandcentrix GmbH
  • "Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver"
    Mike Dallaway
    Mira 2014 Limited
  • "The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!"
    Klaus Degner
    Managing Director, Allegro Packets GmbH
More