2.67G STM-16 SFP CWDM ~100 km / 29 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
Powerbudget of 29 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~100 km / 29 dB
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1626.29.xD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Temperature Range
2.67G STM-16 SFP CWDM Extended ~100 km / 29 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
2.67G STM-16 SFP CWDM Extended | ~100 km / 29 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 197.51 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM STM-16
Distance 100 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Externally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 29 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -29 dBm / -9 dBm (overload) @2G
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ @2G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1442706PG1 compatible
  • ADVA 0061704698 compatible
  • Arista 3rd_Party SFP-1G-LX compatible
  • Arista SFP-1G-LX compatible
  • Aruba Networks(ex. HP Network) J4860C compatible
  • Ciena (ex. Nortel) NTK590TH compatible
  • Ciena XCVR-100D61 compatible
  • Cisco Systems CWDM-SFP-1610 compatible
  • Cisco Systems ONS-SC-Z3-1610 compatible
  • Coriant (ex. Tellabs) 81.SOC48IR2AH1S compatible
  • Ericsson RDH90120/81728 compatible
  • FibroLAN SF2G-LX4-5C-61 compatible
  • Huawei CWDM-SFPGE-1611 compatible
  • Huawei eSFP-LH80-SM1611 compatible
  • Infinera (ex. Transmode) TRX100015/61 compatible
  • Infinera TOM-MR-C61-LR2 compatible
  • Juniper (ex BTI Systems) BP3AM1CL compatible
  • Juniper SFP-1GE-LH compatible
  • Marconi SU68AD compatible
  • Marconi SU68CU compatible
  • Marconi SU68CU-OMS1200 compatible
  • MRV SFP-27DCWLR-61R compatible
  • Net Insight NPA0023-1610 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196350033 compatible
  • Nokia Siemens Networks V50017-U3161-K500 compatible
  • Nokia Siemens Networks V50017-U3361-K500 compatible
  • Ribbon (ex. ECI) OTR16_L5 compatible
  • Ribbon (ex. ECI) OTR1_L5 compatible
  • Ribbon (ex. ECI) OTR4_L5 compatible
Your vendor / compatibility is missing?

What customers say

FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
Extensive list of supported vendors. Your product is like a Swiss Army Knife that all Engineers should have!! Great Job and keep it up!
Fahad Dalwai Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.
More