100BASE-TX Industrial Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s
Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10 Mbit/s - 125 Mbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Operating Temperature from -40°C to 85°C
Specs
- Copper
- 100 m
- 125 M
- Industrial
Protocols
- 100M ETH
- 10M ETH
-
Alternatives
-
Alternatives
Specification
Form Factor | SFP |
---|---|
Connector / Polish | RJ-45 |
Interface | Copper |
Compliance Code | T |
Distance | 100 m |
---|---|
Temperature Range | -40°C - 85°C |
Bandwidth | 10 Mbit/s - 125 Mbit/s |
Digital Diagnostic Management (DDM) | not implemented |
Power Consumption | 1.05 W |
---|---|
Supported Protocols | Ethernet, Fast Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-FE-T-I compatible
- Hirschmann M-FAST SFP-TX compatible
- Zyxel SFP-100T compatible
Your vendor / compatibility is missing?
What customers say
Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki
Nettec
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren
Technical Consultant, IP Visie Networking B.V.
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!
Francis Monestier
System & Network Engineer / JigWan
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
Fahad Dalwai
Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.