400G QSFP-DD ER8 with dual CDR 40 km, λ1274-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 40 km
- 425 G
- LC
- 400G ETH
-
Alternatives
-
Matching Products
Our order confirmation will provide the final shipping date.
-
~May 10, 2024+50 pcs
-
~May 28, 2024+20 pcs
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | ER8 |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 425 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 15.4 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 18 dB |
Transmit min/max per lane | -0.6 dBm / 5.6 dBm |
Receiver min/max per lane | -18.6 dBm / -4.4 dBm (overload) @400G |
Wavelength TX (Typical) | 1273.5 nm, 1277.9 nm, 1282.3 nm, 1286.7 nm, 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1273.5 nm, 1277.9 nm, 1282.3 nm, 1286.7 nm, 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
---|---|
Laser | EML |
Receiver Type | APD |
Modulation | PAM4 @400G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 6 dB |
Supported Protocols | 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.