Industrial SFP Serial to IP Converter RS-232 or RS485/422
- Copper
- 30 m
- 1.25 G
- Industrial
- 100M ETH
- 1G ETH
- RS232
- RS485/422
Hardware Restrictions
For your customer account, we have a restriction to a specific Series for this product which may affect leadtime.
You'll automatically receive the listed hardware, as soon as the hardware is available.
If you'd like to receive another hardware, you can add a comment during checkout.
The availability of the Series changes quite fast and may not be correct. It's just an indication.
| Series | Reason | Ticket Number |
|---|
Just go to cart and click CREATE QUOTE.
Flexoptix' T.C12.RS232I low power industrial SFP (Small Form-factor Pluggable) module is a serial interface (RS-232/485/422) to IP (Ethernet) data converter. T.C12.RS232I can be plugged into any Ethernet device with SFP ports that support 100BASE-FX and/or 1000BASE-X. Datarate settings can be easily performed via Web or Telnet access. For security reasons, the web and telnet access offers a write-protection mode using an integrated switch on the SFP module.
Serial data transmission can be estabilshed by UDP or TCP protocols. The SFP module is fully compatible to 3rd-Party COM-Servers. You can use the SFP module for COM Port Extenders and Virtual Serial Ports.
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | RJ-45 |
| Interface | Copper |
| Compliance Code | Serial |
| Operating Temperature | Industrial |
|---|---|
| Distance | 30 m |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | not implemented |
|---|---|
| Power Consumption | 0.5 W |
| Supported Protocols | RS-232, RS-485/422, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (1000F) compatible
- MSA Standard (100F) compatible
- Arista SFP-1G-LX compatible
- Cisco Systems (ex. Linksys) MGBT1 compatible
- Cisco Systems GLC-SX-MMD compatible
- Juniper EX-SFP-1GE-LX compatible
- MikroTik S-RJ01 compatible
- Moxa SFP-1GTXRJ45-T compatible
- Arista 3rd_Party SFP-1G-LX compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.