622M SFP STM-440 km, λ1310 nm, DDM, LC, Singlemode

OC12/STM4 Singlemode SFP
S.1306.40.D
SFP
STM-4
  • Universal SONET / SDH SFP Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • Capable of operating in SDH / SONET networks
  • Supported Data Rates: 125 Mbit/s - 622 Mbit/s
  • Up to 40 km via Singlemode OS2
  • LC-Connector
  • Digital Diagnocstic Monitoring (DDM)
Specs
1310 nm 40 km 622 M
Protocols
100M ETH STM-1 STM-4
Choose config method
Compatible to
Part number
S.1306.40.D
Ships today Order until 4 PM (German time)
20 pcs
Your price
45.45 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP
  • Connector / Polish
    LC Duplex / PC
  • Interface
    Singlemode
  • Type
    STM-4
  • Distance
    40 km
  • Temperature range
    0°C - 70°C
  • Bandwidth
    125 Mbit/s - 622 Mbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    1 W
  • CDR
    none
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    25 dB
  • Transmit min/max
    -3 dBm / 2 dBm
  • Receiver min/max
    -28 dBm / -8 dBm (overload)
  • Wavelength Tx (typical)
    1310 nm
  • Wavelength Tx (range)
    1274 - 1356 nm
  • Wavelength Rx (typical)
    1310 nm
  • Wavelength Rx (range)
    1260 - 1600 nm
  • Laser
    FP
  • Receiver Type
    PIN
  • Extinction Ratio
    10 dB
  • Protocols
    STM-1, STM-4, Fast Ethernet

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1184544P1 compatible
  • ADTRAN 1184544PG1 compatible
  • Barnfind BTSFP-LX-SM-0640 compatible
  • Brocade (ex. Foundry) OC12-SFP-LR1 compatible
  • Ciena (ex. Nortel) NTTP05EF compatible
  • Cisco Systems ONS-SI-622-L1 compatible
  • Cisco Systems SFP-OC12-LR1 compatible
  • Coriant (ex. Tellabs) TR-0005 compatible
  • ECI OTR4_L3 compatible
  • Ericsson RDH90120/C0228 compatible
  • Marconi SU67AB compatible
  • Net Insight NPA0014-LL11 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360006 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376360002 compatible
  • Nokia (ex. Alcatel-Lucent) OM622M-L4.1 compatible
  • Nokia Siemens Networks V50017-U331-K500 compatible
  • Packetlight SL7 compatible
  • Transition Networks TN-SFP-OC12S4 compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
  • "The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!"
    Klaus Degner
    Managing Director, Allegro Packets GmbH
  • "The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage."
    Shaun James
    Engineering Inspector, Tata Steel Strip Products UK
More