622M SFP STM-4 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 622 M
- 100M ETH
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | STM-4 |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 622 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 25 dB |
| Transmit min/max per lane | -3 dBm / 2 dBm |
| Receiver min/max per lane | -28 dBm / -8 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1274 - 1356 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 10 dB |
| Supported Protocols | Fast Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1184544P1 compatible
- ADTRAN 1184544PG1 compatible
- Barnfind BTSFP-LX-SM-0640 compatible
- Brocade / Ruckus OC12-SFP-LR1 compatible
- Ciena (ex. Nortel) NTTP05EF compatible
- Cisco Systems ONS-SI-622-L1 compatible
- Cisco Systems SFP-OC12-LR1 compatible
- Coriant (ex. Tellabs) TR-0005 compatible
- Ericsson RDH90120/C0228 compatible
- Marconi SU67AB compatible
- Net Insight NPA0014-LL11 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196360006 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376360002 compatible
- Nokia (ex. Alcatel-Lucent) OM622M-L4.1 compatible
- Nokia Siemens Networks V50017-U331-K500 compatible
- Packetlight SL7 compatible
- Ribbon (ex. ECI) OTR4_L3 compatible
- SagemCOM 252586245 compatible
- Transition Networks TN-SFP-OC12S4 compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.