622M SFP STM-4 15 km, λ1310 nm, DDM, LC-Duplex, Singlemode

Universal SONET / SDH SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 622 Mbit/s
Up to 15 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 15 km
  • 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1306.15.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
622M SFP STM-4 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode 
622M SFP STM-4 | 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
0 pcs in stock As low as 42.79 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
30 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code STM-4
Distance 15 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 622 Mbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 13 dB
Transmit min/max per lane -15 dBm / -8 dBm
Receiver min/max per lane -28 dBm / -8 dBm (overload) @100M - 800M
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1274 - 1356 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1600 nm
Laser FP
Receiver Type PIN
Modulation NRZ @100M - 800M
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1184544P2 compatible
  • ADTRAN 1184544PG2 compatible
  • Barnfind BTSFP-LX-SM-0620 compatible
  • Brocade / Ruckus OC12-SFP-SR1 compatible
  • Ciena (ex. Nortel) NTTP04CF compatible
  • Cisco Systems ONS-SI-622-I1 compatible
  • Cisco Systems SFP-OC12-IR1 compatible
  • Cisco Systems SFP-OC12-SR compatible
  • Clear-Com SFP LX100 compatible
  • Coriant (ex. Tellabs) TR-0004 compatible
  • Dell (ex. Force10) GP-SFP2-OC12/3-1IR1 compatible
  • Edge Core ET3201- FX20 compatible
  • Ericsson RDH90120/C0213 compatible
  • Infinera (ex. Transmode) TRX100038 compatible
  • Juniper SFP-OC12-IR compatible
  • Juniper SFP-OC12-SR compatible
  • Marconi SU67AA compatible
  • Net Insight NPA0014-LJ11 compatible
  • Nokia (ex. Alcatel-Lucent) 109509687 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360004 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360005 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376360001 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00041AA compatible
  • Nokia Siemens Networks V50017-U330-K500 compatible
  • Overture 3000-053 compatible
  • Packetlight SL7 compatible
  • RAD SFP-15 compatible
  • Ribbon (ex. ECI) OTR4_S3 compatible
  • Transition Networks TN-SFP-OC12S compatible
Your vendor / compatibility is missing?

What customers say

Since we ordered a FLEXBOX, our life as definitly changed. There’s a before and an after FLEXBOX. So many vendors in the compatibility matrice, so easy way to configure the module! And the cables and accessories came also with quality.
Stéphane Gouron Directeur Agence Ouest, S-cube.
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne Retired scientist, now acting in the field of IT support, R.O. Kuehne

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS
More