2.67G SFP STM-1610 km, λ1310 nm, DDM, LC, Singlemode

2.67G SFP STM-16 | 10 km, λ1310 nm, DDM, LC, Singlemode
S.1326.10.D
SFP
STM-16
  • Universal SONET / SDH SFP Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • Capable of operating in SDH / SONET networks
  • Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
  • Up to 10 km via Singlemode OS2
  • LC-Connector
  • Digital Diagnocstic Monitoring (DDM)
Specs
1310 nm 10 km 2.67 G
Protocols
100M ETH 1G ETH 1G FC 2G FC STM-1 STM-16 STM-4
Choose config method
Compatible to
Part number
S.1326.10.D
Ships today Order until 4 PM (German time)
10 pcs
Your price
75.24 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP
  • Connector / Polish
    LC Duplex / PC
  • Interface
    Singlemode
  • Type
    STM-16
  • Distance
    10 km
  • Temperature range
    0°C - 70°C
  • Bandwidth
    100 Mbit/s - 2.67 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    1 W
  • CDR
    none
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    6.3 dB
  • Transmit min/max
    -11.7 dBm / -3 dBm
  • Receiver min/max
    -18 dBm / -3 dBm (overload)
  • Wavelength Tx (typical)
    1310 nm
  • Wavelength Tx (range)
    1260 - 1360 nm
  • Wavelength Rx (typical)
    1310 nm
  • Wavelength Rx (range)
    1260 - 1620 nm
  • Laser
    FP
  • Receiver Type
    PIN
  • Extinction Ratio
    8.2 dB
  • Protocols
    1G Fibre Channel, 2G Fibre Channel, STM-1, STM-16, STM-4, Gigabit Ethernet, Fast Ethernet

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061705805 compatible
  • ADVA 0061705805-02 compatible
  • Brocade (ex. Foundry) E1MG-LX-OM compatible
  • Ciena (ex. Nortel) NTTP03CF compatible
  • Cisco Systems DS-SFP-2G-FC-LW compatible
  • Cisco Systems GLC-LH-SMD compatible
  • Cisco Systems ONS-SE-G2F-LX compatible
  • Cisco Systems ONS-SI-155-I1 compatible
  • Cisco Systems ONS-SI-2G-I1 compatible
  • Cisco Systems ONS-SI-2G-S1 compatible
  • Cisco Systems ONS-SI-622-I1 compatible
  • Cisco Systems SFP-GE-L compatible
  • D-LINK DEM-210 compatible
  • ECI OTR16_S3 compatible
  • Ericsson RDH10247/2 compatible
  • Hirschmann M-SFP-LX/LC compatible
  • Huawei eSFP-GE-LX-SM1310 compatible
  • Infinera (ex. Transmode) TRX100041 compatible
  • Infinera TOM-2.5GMR-SR1 compatible
  • Juniper SFP-1OC48-IR compatible
  • Marconi SU57AE compatible
  • MRV SFP-DGD-LX compatible
  • MRV SFP-MR27D-IR1-R compatible
  • Net Insight NPA0022-LS11 compatible
  • Netgear AFM735 compatible
  • Netgear AGM732F compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196370006 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB376370002 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
  • Nokia Siemens Networks V50017-U5440-K500 compatible
  • Packetlight SL8 compatible
  • Perle PSFP-2GD-S2LC20 compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
  • "It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!"
    David Schoefberger
    Schoefberger
  • "Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver"
    Mike Dallaway
    Mira 2014 Limited
More