4G Fibre Channel SFP 40 km, λ1550 nm, DDM, LC-Duplex, Singlemode

Universal Fibre Channel SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 1.05 Gbit/s - 4.25 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1550 nm
  • 40 km
  • 4.25 G
Protocols
  • 1G ETH
  • 1G FC
  • 2G FC
  • 4G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1548.40.D:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
4G Fibre Channel SFP 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode 
4G Fibre Channel SFP | 80 km, λ1550 nm, DDM, LC-Duplex, Singlemode
0 pcs in stock As low as 181.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Singlemode
Compliance Code 4G FC LW
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 1.05 Gbit/s - 4.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 18 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -18 dBm / -3 dBm (overload) @4G
Wavelength TX (Typical) 1550 nm
Wavelength TX (Range) 1530 - 1570 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @4G
Transmit and Dispersion Penalty 1 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cyan 280-0331-00 compatible
  • MRV SFPFC404 compatible
  • Packetlight SL9 compatible
  • Riedel 1990039 compatible
  • Transition Networks TN-SFP-FC4XS40 compatible
Your vendor / compatibility is missing?

What customers say

Extensive list of supported vendors. Your product is like a Swiss Army Knife that all Engineers should have!! Great Job and keep it up!
Fahad Dalwai Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham Senior Network Engineer - Airspeed Telecom
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner Managing Director, Allegro Packets GmbH
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
More