4G Fibre Channel SFP30 km, λ1310 nm, DDM, LC-Duplex, Singlemode

4G Fibre Channel Singlemode SFP
S.1348.30.D
SFP
4G FC LW
  • Universal Fibre Channel SFP Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • Fibre Channel (FC) support for storage area network (SAN) interconnect
  • Supported Data Rates: 1.25 Gbit/s - 4.25 Gbit/s
  • Up to 30 km via Singlemode OS2
  • LC-Duplex Connector
  • Digital Diagnocstic Monitoring (DDM)
Specs
1310 nm 30 km 4.25 G
Protocols
1G ETH 1G FC 2G FC 4G FC STM-16
Choose config method
Compatible to
Part number
S.1348.30.D
Availability
4-6 weeks after ordering
Your price
89.26 EUR
Excl. 16% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP
  • Connector / Polish
    LC-Duplex PC
  • Interface
    Singlemode
  • Type
    4G FC LW
  • Distance
    30 km
  • Temperature range
    0°C - 70°C
  • Bandwidth
    1.25 Gbit/s - 4.25 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    1 W
  • CDR
    none
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    18 dB
  • Transmit min/max
    0 dBm / 5 dBm
  • Receiver min/max
    -18 dBm / -3 dBm (overload)
  • Wavelength Tx (typical)
    1310 nm
  • Wavelength Tx (range)
    1260 - 1360 nm
  • Wavelength Rx (typical)
    1310 nm
  • Wavelength Rx (range)
    1260 - 1600 nm
  • Laser
    DFB
  • Receiver Type
    PIN
  • Modulation
    NRZ
  • Extinction Ratio
    0dB
  • Protocols
    1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, STM-16, Gigabit Ethernet

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061703805 compatible
  • Brocade XBR-000146 compatible
  • Cisco Systems DS-SFP-FC4G-LW compatible
  • HP Storage (B-Series) AN211A compatible
  • IBM Storage 45W0499 compatible
  • Packetlight SL9 compatible
  • QLogic SFP4-LW-1PK compatible
  • Riedel 1990006 compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!"
    Thomas Verschuren
    Technical Consultant, IP Visie Networking B.V.
  • "Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use."
    Laert Klemo
    CTO, Eagle Security System
  • "Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows."
    Bronislav Robenek
    Network Architect, Cloud4com
More