10G SFP+ Tunable DWDM ZR80 km, 99 Channels, 50GHz Grid, C-Band, LC

10Gigabit & STM64 Tunable DWDM 50GHz SFP+
P.1696.23.xT
SFP+
ZR
  • Universal tunable SFP+ Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • For 10GBASE-ZR Ethernet links
  • Set channels using your FLEXBOX - more on our blog
  • Reduce spare part stock for your DWDM network
  • Supported Data Rates: 9.95 Gbit/s - 11.3 Gbit/s
  • Up to 80 km via Singlemode OS2
  • LC-Connector
Specs
DWDM 50GHz 80 km 11.3 G Tunable
Protocols
10G ETH 10G FC
Choose config method
Compatible to
Part number
P.1696.23.xT
Ships today Order until 4 PM (German time)
25 pcs
Your price
2,394.00 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP+
  • Connector / Polish
    LC Duplex / PC
  • Interface
    Singlemode DWDM 50GHz
  • Type
    ZR
  • Distance
    80 km
  • Temperature range
    0°C - 70°C
  • Bandwidth
    9.95 Gbit/s - 11.3 Gbit/s
  • Digital Diagnostic Management (DDM)
    Yes, internally calibrated
  • Power Consumption
    1.8 W
  • CDR
    none
  • SGMII
    No
  • Inbuilt FEC
    No
  • Powerbudget (dB)
    23 dB
  • Transmit min/max
    -1 dBm / 3 dBm
  • Receiver min/max
    -24 dBm / -7 dBm (overload)
  • Wavelength Tx (typical)
    tunable DWDM 50GHz
  • TX Tuneable Range
    1529.16 - 1568.36 nm
  • Wavelength Rx (range)
    1260 - 1600 nm
  • Laser
    ILMZ
  • Receiver Type
    APD
  • Transmit and Dispersion Penalty
    2 dB
  • Dispersion Tolerance
    -400 ps/nm to 1,600 ps/nm
  • Extinction Ratio
    9 dB
  • Protocols
    10G Ethernet, 10G FC

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Related know how

  • DWDM OSNR values for P.1696.23.xT

    OSNR Characteristics with External CDR for for FLEXOPTIX tunable DWDM P.1696.23.xT (*)
    at different datarates, Bit-Error-Rates, Rx Input Power Ranges, and dispersion levels.

    Data Rate (gbps) BER Dispersion (ps/nm) Rx Power Range (dBm) OSNR (dB)
    10.709 1E-4 0 -7 to -18 16
    10.709 1E-4 -400 to +1450 -7 to -18 19
    11.1 1E-4 0 -7 to -18 17
    11.1 1E-4 -400 to +1450 -7 to -18 20
    9.95
    10.3
    10.5
    1E-12 0 -7 to -24 30
    9.95
    10.3
    10.5
    1E-12 0 -7 to -19 25
    9.95
    10.3
    10.5
    1E-12 -400 to +1450 -7 to -19 26

    (*) For all technology loving people: There is a balance or better a direct relation between Data Rate, BER (Bit-Error-Rate), Chromatic Dispersion (CD), Rx Power Range and OSNR (Optical-Signal-to-Noise-Ratio). A high gap between Signal-Level and Noise-Level results in a low BER. To achieve this big gap the input power needs to be higher than with lower BER and same OSNR. If you consider the Cromatic Disperion, too you need to have around 3-4dB more input power than without Chromatic Dispersion. This 3-4dB are known as Dispersion Penalty which has to be considered when CD is in given range. This is almost the same for all data-rates around 10G. (here 10.709-11.1 gbps) If you for example compare this with a 1G signal the OSNR can be much lower because of higher signal spacing.

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • Accedian Networks 7SP-402 compatible
  • ADVA 1061702000-01 compatible
  • ADVA 1061702000-02 compatible
  • Arista Networks SFP-10G-DZ-T compatible
  • Avaya (ex. Nortel) AA1403016-E6 compatible
  • Brocade 10G-SFPP-ZR compatible
  • Brocade 10G-SFPP-ZRD-T compatible
  • Brocade XBR-000174 compatible
  • Ciena 160-9201-900 compatible
  • Ciena XCVR-T80W01 compatible
  • Cisco Systems DWDM-SFP10G-50.12 compatible
  • Cisco Systems DWDM-SFP10G-C compatible
  • Cisco Systems ONS-SC+-10G-C compatible
  • Cisco Systems SFP-10G-ZR compatible
  • Coriant (ex. Tellabs) 81.71T-SPDWDM-R6 compatible
  • Cyan 280-0451-00 compatible
  • Dell (ex. Force10) GP-10GSFP-Wxx compatible
  • ECI OTP10T_17_ALLN compatible
  • Ericsson RDH901032/1 compatible
  • Extreme 10325 compatible
  • Huawei OSX080N01 compatible
  • Infinera (ex. Transmode) TRX100117/TC compatible
  • Intel E10GSFPLR compatible
  • Juniper SFP-10GE-ZR compatible
  • Juniper SFPP-10G-CT50-ZR compatible
  • Juniper SFPP-10G-DT-ZRC2 compatible
  • MRV SFP-10GDWZR-TC compatible
  • Nevion SFP-TR10-TD15xx.xx-ZR compatible
  • Nokia (ex. Alcatel-Lucent) 3HE08142BA compatible
  • Transition Networks TN-10GSFP-LR7 compatible
Your vendor / compatibility
is missing?

What Customers say

  • "The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it."
    Adam Montgomery
    Necto Inc
  • "Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows."
    Bronislav Robenek
    Network Architect, Cloud4com
  • "Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX. Having Universal Transceiver on stock and instantly program them to customer's need is amazing."
    Elmar Gruber
    H82 medientechnik GmbH
More