10GBASE-T Copper SFP+30 m, RJ-45, RX_LOS

SFP+ Copper, 100M/1000M/10 GBase-T
T.C96.02.KF
SFP+
T
  • Universal Copper SFP+ Transceiver
  • Use FLEXBOX to configure to almost any vendor
  • Supported Data Rates: 10.31 Gbit/s
  • Up to 30 m via CAT6a Cable
  • RJ-45 connector
Specs
Copper 30 m 10.31 G
Protocols
10G ETH
Choose config method
Compatible to
Part number
T.C96.02.KF
Ships today Order until 4 PM (German time)
71 pcs
Back in stock Estimated arrival of additional items.
Our order confirmation will provide the final shipping date.
~Dec 19, 2019
+310 pcs
Your price
122.36 EUR
Excl. 19% Tax
You can create a quote from your cart.
Just click CREATE QUOTE.

Specification

  • Form factor
    SFP+
  • Connector / Polish
    RJ-45
  • Interface
    Copper
  • Type
    T
  • Distance
    30 m
  • Temperature range
    0°C - 70°C
  • Bandwidth
    10.31 Gbit/s
  • Digital Diagnostic Management (DDM)
    not implemented
  • Power Consumption
    3 W
  • Special Features
    RX_LOS
  • Protocols
    10G Ethernet

TRANSCEIVER CONFIGURATION WITH FLEXBOX IT'S THAT EASY TO USE

1 Insert into Flexbox

  • Download and start our FLEXOPTIX App
  • Connect your FLEXBOX using the supplied USB cable
  • Insert a Universal Transceiver

2 Select and configure

  • Simply choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds

3 Use with device

  • Use the transceiver in your device. That's it!
  • Need it for another device? - Just re-configure it again and again

Related know how

  • 10GBase-T copper SFP+ with RJ45

    The idea of switch manufacturers was entering the new fiber transceiver era. Implementing only SFP+ or SFP cages for being more flexible for future needs. Copper ports were only implemented for management purpose so far.

    But there were a couple of applications in the past with 1G where Servers or other components do only have 1G copper ports. So 1G copper SFPs had the right to exist. Now all connections moved from 1G to 10G and the copper ports disappeared so far. But a while ago some vendors started implementing 10G copper to their devices again. One of the main applications in data centers is using SFP+ DAC cables. But the use of "normal" RJ45 cables is often easier than using a copper DAC. To have a great interoperability between existing fiber switches and those with 10G copper ports Flexoptix is providing a 10G universal copper SFP+ which also can be used used with speeds of 100/1000Base-T. This makes Flexoptix' Universal 10G copper SFP+ (T.C96.02.KF) backwards compatible and therefore usable for nearly every copper infrastructure.
    Some features in detail:

    • Link length: Up to 30m using Cat 6a/7 cable
    • Backward compatibility: Supports 100/1000Base-T
    • MDI/MDIX crossover
    • Auto-negotiation with other 10Gbase-T PHYs
    • Flexbox ready

    Application example:

    Copper 10G SFP+(1)

    Good to know: The Transceiver is with 3,5 Watt not fitting the MSA. This causes some devices to refuse the optic. (not that much known so far :-)

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Alcatel-Lucent Ent. SFP-10G-T compatible
  • Allied Telesis AT-SP10T compatible
  • Aruba Networks(ex. HP Network) 813874-B21 compatible
  • Avaya (ex. Nortel) AA1403020-E6 compatible
  • barox AC-SFP+-T compatible
  • Brocade (ex. Foundry) 10G-SFPP-SR compatible
  • Ciena (ex. Nortel) NTTP30CFE6 compatible
  • Cisco (ex. Meraki) MA-CBL-TA-3M compatible
  • Cisco Systems SFP-H10GB-ACU10M compatible
  • Cisco Systems SFP-H10GB-CU5M compatible
  • ComNet SFP-49 compatible
  • D-LINK DEM-CB700S compatible
  • Dell (ex. Force10) GP-10GSFP-T compatible
  • Dell 407-BBWL compatible
  • Dell 407-BBWT compatible
  • Edge Core ET5402-SR compatible
  • Extreme 10307 compatible
  • Extreme 10338 compatible
  • Fortinet FS-TRAN-SFP+GC compatible
  • Fortinet SP-CABLE-ADASFP+ compatible
  • Huawei SFP-10G-DAC5M compatible
  • Infortrend 10GBase-T compatible
  • Intel E10GSFPSR compatible
  • Juniper EX-SFP-10GE-DAC-1M compatible
  • LANCOM FP-CO1_10 compatible
  • Mellanox MC3309130-001 compatible
  • Netgear AXM765 compatible
  • Palo Alto Networks PAN-SFP-PLUS-10GBASE-T compatible
  • QNAP 10G-T compatible
  • StartTech SFP10GBTST compatible
  • Supermicro AOM-AQS-107-B0C2-CX compatible
  • Ubiquiti Networks SFP-10G-T compatible
Your vendor / compatibility
is missing?

What Customers say

  • "Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk."
    Donal Cunningham
    Senior Network Engineer - Airspeed Telecom
  • "The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX"
    Sylvain Brisebois
    Advance Research, Senior Firmware Engineer, KINOVA
  • "Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!"
    Jeffrey Bosma
    XS News , Sr. System & Network Engineer
More