10G SFP+ LR Extended with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode

Universal SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.3 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -5°C to 85°C
Specs
  • 1310 nm
  • 10 km
  • 11.3 G
  • Extended
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
P.1396.10.IR:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface Singlemode
Type LR
Distance 10 km
Temperature Range -5°C - 85°C
Bandwidth 8.5 Gbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.2 dB
Transmit min/max per lane -8.2 dBm / 0.5 dBm
Receiver min/max per lane -14.4 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1270 - 1355 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1565 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Transmit and Dispersion Penalty 3.2 dB
Extinction Ratio 5 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # 12358 compatible
  • ADTRAN # compatible
  • ADVA # compatible
  • Allied Telesis # 12360 compatible
  • Arista 3rd_Party # 12361 compatible
  • Aruba Networks(ex. HP Network) J9151A compatible
  • Avaya (ex. Nortel) # 12362 compatible
  • Brocade / Ruckus 10G-SFPP-LR compatible
  • Brocade 10G-SFPP-LR compatible
  • Calix 100-01512 compatible
  • Check Point # 12364 compatible
  • Chelsio # 12365 compatible
  • Ciena (ex. Nortel) # 12366 compatible
  • Cisco Systems SFP-10G-LR compatible
  • D-LINK # 12368 compatible
  • Dell # 12367 compatible
  • Dell (ex. Force10) # 12373 compatible
  • Edge Core # compatible
  • Extreme # 12370 compatible
  • Extreme (ex. Enterasys) # 12369 compatible
  • F5 Networks # 12371 compatible
  • FibroLAN # compatible
  • Fluke Networks # 12372 compatible
  • Fortinet # 12374 compatible
  • Fujitsu # 12375 compatible
  • HP H3C JD094B compatible
  • Huawei OSX010000 compatible
  • Infinera (ex. Transmode) # 12393 compatible
  • Intel E10GSFPLR compatible
  • Juniper # 12380 compatible
  • Keymile # 12381 compatible
  • KTI Networks # 12382 compatible
  • LANCOM # 12383 compatible
  • Lenovo (ex. Blade Network) # 12378 compatible
  • LevelOne # 12384 compatible
  • MikroTik S+31DLC10D compatible
  • Motorola # compatible
  • Moxa # 12386 compatible
  • MRV # 12387 compatible
  • Netgear # 12388 compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04823AA compatible
  • Nokia Siemens Networks # 12389 compatible
  • Nvidia (ex. Mellanox) # compatible
  • Oracle # compatible
  • Packetlight SL110 compatible
  • Packetlight SL112 compatible
  • Palo Alto Networks # 12390 compatible
  • Radware # 12391 compatible
  • Ribbon (ex. ECI) OTPMR_PI3 compatible
  • Solarflare # compatible
  • Supermicro # 12392 compatible
  • TP-LINK # compatible
  • Transition Networks # compatible
  • Zyxel # compatible
Your vendor / compatibility is missing?

What customers say

Now that I’m done configuring my equipment, I use FLEXBOX to impress associates. I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter. Keep up the good work!
Nikos Papandreou Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA

As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.

One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.

Martin Fiegel Network Engineer/ Soapeople.com
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT
More